Copper sheet spot welder JIDW-600+120
The intermediate frequency spot welding machine is particularly effective in welding copper sheet, and is a necessary welding machine for copper sheet spot welding
Spot welding electrode,
The spot welding electrode is composed of copper through water+electric welding head. Water cooling cycle can be carried out, which can protect the electrode and enhance the welding time.
Different welding points require different welding joints.
Comparison between medium frequency DC resistance welding controller and AC control
1. When AC current passes through the welding area, it will diverge due to the surface effect. On the contrary, the medium frequency welder outputs DC current with very small ripple
The welding area has a "bunching effect" towards the center. It can concentrate the welding heat and reduce the heat affected zone around the welding point. This feature is particularly important for the welding of multilayer plates and thick plates;
2. The AC welding machine adopts the AC chopping mode, so it has the characteristics of discontinuous current and high current peak, which causes the AC welding machine to weld
It is easy to produce a lot of spatter during the welding process, which will damage the surface of the weldment and bring a lot of work to the manufacturer. The medium frequency DC welding machine outputs continuous DC current, with stable current and high control accuracy. In addition, the bunching effect of DC current ensures that there is little or no spatter during welding.
3. The medium frequency DC controller outputs DC current with very small ripple, without zero crossing effect, so it has irreplaceable advantages in light alloy, heat-resistant steel, precision parts, high-speed seam welding and occasions with high requirements for welding quality.
Performance characteristics
The medium frequency DC resistance welding controller has the following advantages:
It is especially suitable for the precise connection of copper, aluminum, nickel, molybdenum, tungsten, manganese, gold, silver and other non-ferrous and precious metals. It is widely used in battery plants, electric light source plants, automobiles, medical devices, photoelectric communication plants, micro motor plants, and chip inductors and coils of high-temperature enamelled wire / ultra-fine enamelled wire (minimum 0.02mm) with high customer requirements, Metal wire welding, nickel cup, cutting wire welding, CCFL welding, fuse, filament welding, etc.
1. When AC current passes through the welding area, it diverges due to the surface effect. On the contrary, the DC current with small ripple output from the medium frequency welder has a "cluster effect" to the center when passing through the welding area. It can concentrate the welding heat and reduce the heat affected zone around the welding joint. This feature is particularly important for the welding of multi-layer plates and thick plates;
2. The output of medium frequency DC welder is continuous DC, with stable current and high control accuracy. Coupled with the bunching effect of DC, it can ensure that there is little or no spatter in the welding process.
3. The medium frequency DC controller outputs DC current with very small ripple and no zero crossing effect. Therefore, it has irreplaceable advantages in light alloy, heat-resistant steel, precision parts, high-speed seam welding and occasions with high welding quality requirements.
Other names
Spot welding machine, medium frequency spot welding machine, welding machine,,
automobile nut spot welding machine, copper plate spot welding machine, galvanized plate spot welding machine, stainless steel spot welding machine
Product Description
Performance characteristics
1. According to the different welded products, the cylinder is adjustable, with a diameter of 120MM. The stroke is adjustable, and the welding is aimed at different products, which can better control the welding effect.
Comparison of medium frequency and power frequency welding effects
Weld nuts with an intermediate frequency welder
2.Control center: intermediate frequency transformer+intermediate frequency electric control box
3.Functions of electric cabinet
1. Output power frequency: 1kHz ~ 4kHz;
2. Programmable up to 32 sets of welding specifications;
3. Three stage heating process: preheating, welding and tempering; In the welding section, you can define increasing and decreasing sections and cycle times;
4. Programmable output I / O port: programmable 3-segment output to better adapt to PLC, robot, etc;
5. Counting systems such as solder joint counting, number of workpieces, packing number and electrode grinding counting are convenient for output management;
6. Communication and BCD code control function: it can be externally connected with industrial computer, PLC and other equipment to realize remote control and automatic management;
Technical parameters:
| Model | Rated power KVA | Input voltage V | Nominal frequency HZ | Maximum short circuit current A | Recommended maximum welding current A | arm length MM | ectrode travel MM | Cooling water volume | Weight KG |
| JIDW-400+90 | 90 | 380*3 | 1000 | 20000 | Spot welding15000/ row welding10001 | 400 | 50 | 10 | 350 |
| JIDW-600+120 | 120 | 380*3 | 1000 | 30000 | Spot welding20000/ row welding15000 | 400 | 50 | 10 | 400 |
| JIDW-800+180 | 180 | 380*3 | 1000 | 40000 | Spot welding30000/ row welding25000 | 400 | 50 | 10 | 430 |
| JIDW-1000+220 | 220 | 380*3 | 1000 | 50000 | Spot welding35000/ row welding28000 | 400 | 50 | 12 | 460 |
| JIDW-1200T+240 | 240 | 380*3 | 1000 | 55000 | Spot welding42000/ row welding28000 | 400 | 50 | 12 | 500 |
| JIDW-1200T+350 | 350 | 380*3 | 1000 | 55000 | Spot welding45000/ row welding35000 | 400 | 50 | 12 | 530 |
Packaging outlet
Warm tip:
our products are constantly upgrading and adjusting.
If the pictures displayed are different from the real object,
the real object shall prevail, and will be confirmed when placing the order.
